Wireless » Wireless N (150 - 450 Mbps) » Access Points and Routers

ID #1050

Router Quick Setup Guide

This guide presents the basic steps to set up and operate this device. For detailed instructions and specifications, refer to the user manual on the CD enclosed with this product or at www.intellinet-network.com.
Step 1 - Hardware Connections
  • Connect your DSL or cable modem to the WAN port of the router using the provided RJ45 Ethernet cable.
  • Connect all your computers and network devices (network-enabled components like game consoles, network media players, network storage units or LAN switches) to the LAN ports (1-4) of the router
  • Connect the A/C power adapter to the wall socket, and then connect it to the power jack of the router.

Step 2 - DSL Connection
2.1 Open your Web browser and enter to display a login window. Enter "admin" as the username and "1234" as the password. '
2.2 Click "General Setup"; click "WAN"; select "PPPoE"; click "More Configuration".
2.3 Enter the DSL username and password provided by your Internet service provider. Click "Apply," then click "Apply" again to save the settings.

Step 3 - Cable Modem Connection
  • Power off the cable modem and wait 5 seconds.
  • Power on the cable modem and wait 2 minutes. NOTE: You should now have an Internet connection.

If not, refer to the user manual.
3G Setup for users of the Intellinet Wireless 3G Router
  • Connect the 3G modem to the USB port on the front panel of the router.
  • Connect to the router as explained in Step 2.1.
  • Click "General Setup," click "WAN," select "3/3.5G," click "More Configuration. Then enter the information required for your provider.

This article relates to the following product(s):


Categories for this entry

Tags: installation, routers, wireless

Related entries:

Change language

Digg it! Print this record Send to a friend